#Display #ePaper #epd

no-std epd-waveshare

An embedded-hal based driver for ePaper displays from Waveshare

1 unstable release

new 0.2.0 Nov 6, 2018

#18 in #display

Download history 7/week @ 2018-11-07

2 downloads per month

ISC license

84KB
1.5K SLoC

Build Status

This library contains a driver for E-Paper Modules from Waveshare.

It uses the embedded graphics library for the optional graphics support.

Examples

There are multiple examples in the examples folder. For more infos about the examples see the seperate Readme there.

// Setup the epd
let mut epd = EPD4in2::new(&mut spi, cs, busy, dc, rst, &mut delay)?;

// Setup the graphics
let mut buffer = Buffer4in2::default();
let mut display = Display::new(epd.width(), epd.height(), &mut buffer.buffer);

// Draw some text
display.draw(
    Font12x16::render_str("Hello Rust!")
        .with_stroke(Some(Color::Black))
        .with_fill(Some(Color::White))
        .translate(Coord::new(5, 50))
        .into_iter(),
);

// Transfer the frame data to the epd
epd.update_frame(&mut spi, &display.buffer())?;

// Display the frame on the epd
epd.display_frame(&mut spi)?;

(Supported) Devices

Device (with Link) Colors Flexible Display Partial Refresh Supported Tested
4.2 Inch B/W (A) Black, White Not officially [1]
1.54 Inch B/W (A) Black, White
2.13 Inch B/W (A) Black, White
2.9 Inch B/W (A) Black, White ✔ [2]

[1]: 4.2 Inch E-Ink Black/White - Partial Refresh

Out of the Box the original driver from Waveshare only supports full updates.

That means: Be careful with the quick refresh updates:
It's possible with this driver but might lead to ghosting / burn-in effects therefore it's hidden behind a feature.

[2]: 2.9 Inch E-Ink Black/White - Tests

Since my 2.9 Inch Display has some blurring issues I am not absolutly sure if everything was working correctly as it should :-)

Interface

Interface Description
VCC 3.3V
GND GND
DIN SPI MOSI
CLK SPI SCK
CS SPI chip select (Low active)
DC Data/Command control pin (High for data, and low for command)
RST External reset pin (Low for reset)
BUSY Busy state output pin (Low for busy)

Display Configs

There are two types of Display Configurations used in Wavedshare EPDs, which also needs to be set on the "new" E-Paper Driver HAT. They are also called A and B, but you shouldn't get confused and mix it with the Type A,B,C and D of the various Displays, which just describe different types (colored variants) or new versions. In the Display Config the seperation is most likely due to included fast partial refresh of the displays. In a Tabular form:

Type A Tybe B
1.54in (A) 1.54in (B)
2.13in (A) 1.54in (C)
2.13in (D) 2.13in (B)
2.9in (A) 2.13in (C)
2.7in (A)
2.7in (B)
2.9in (B)
2.9in (C)
4.2in (A)
4.2in (B)
4.2in (C)
7.5in (A)
7.5in (B)
7.5in (C)

TODO's

  • improve the partial drawing/check the timings/timing improvements/....

Dependencies

~107KB